The Bakflip G2 and F1 are top contenders in the tonneau cover market. This article aims to dissect the features, durability, and more of Bakflip G2 vs F1. We’ll help you make an informed choice between Bakflip G2 vs. F1. The BAKFlip G2 and F1 are both versatile and unique. You’ll fall into a dilemma when you want to choose any of them. Their folding accessibility, operation, compatibility, sealing system, and water resistance are the same. So, you’ll become irritating when the features are similar. For this reason, I will provide an in-depth comparison of BAKFlip G2 VS F1 to help you out.
There is a way that you can decide by the feature. I mean to say there are some differences between BAKFlipG2 and BAKFlip F1. The G2 can bear 300 lbs weight in distributed weight. On the other hand, F1 is more expensive at 300USD. It can bear 400 lbs. Let’s make more differences between the 2 bedcovers.
Disclosure: Some of the links below are Amazon affiliate links. This means that, at zero cost to you, we will earn an affiliate commission if you click through the link and finalize a purchase. For more, visit our Amazon affiliate disclosure.
BAKFlip G2 tonneau cover
BAKFlip G2 tonneau cover
It has Aluminum Construction and Aluminum surface: With a rust-proof and a standard density core, BAKFlip G2 is a reliable truck-mate. Its Aluminum glossy finish makes it good-looking and dashing. Though it can’t save the cover from scratches and dents as fiberglass can, It can resist Ultra violet rays, light scratches, and water. It can also tolerate the fluctuation of the temperature and isn’t shrinkable.
Rubber hinges also protect the truck bed from water access, and drainage tubes pour the extra water outside the vehicle. It doesn’t have any dual-action locking system. The same lock locks the tailgate and the cover as well. The cover has a tailgate seal to the downside. You can close the cover when the tailgate is also closed.
BAKFlip F1 tonneau cover
BAKFlip F1 tonneau cover
Aluminum construction and a Fiberglass top surface: Its triple-layer construction is ⅝ inches thick. Aluminum constructions make a Tonneau cover durable and strong. The Fiberglass Reinforced Polymer (FRP) saves the cover from weather and other elements (scratches, stains, dirt, dust). FRP works like a cooler and doesn’t let the cover heat.
The rubber flange gasket protects the Tonneau from water and moisture. The gutter system works like a drain that directs all the water out of the vehicle. It has a dual-tailgate operation that makes it special. Most of the Tonneaus don’t have the feature. The tailgate can be opened and closed even when the cover is closed. This is a big advantage of a dual-action locking system.
The installation process of BAKflip G2
Its installation process is inside the truck bed rails. The stake pocket holes remain exposed to other accessories installation.
The installation process of BAKFlip F1
You don’t need drilling and clamping to install it. The F1 leaves the stakes hole pockets for other accessories installation and sits flushed inside the truck bed.
Comparison Table of BAKFlip G2 VS BAKFlip F1
Here is a table with the provided information. Each numbered item is compared with its corresponding information.
| Feature | BAKFlip G2 | BAKFlip F1 |
|---|---|---|
| Panel Core | EPS 2 lb | EPS 3 lb |
| Panel Exterior | Aluminum | FRP Aluminum |
| Panel Frame | Aircraft Aluminum | Aircraft Aluminum |
| Finish | HAIR SELL TEXTURE | FRP |
| Thickness | ½ INCH | ⅝ INCHES |
| Cover Weight | 55 LB | 60 LB |
| Even Weight Ratings | 300 LB | 400 LB |
| Latches | GLASS NYLON | GLASS NYLON |
| Clamps | 6 | 8 |
| Racks | OPTIONAL | OPTIONAL |
| Sliding Tie Down | NO | NO |
| UV Protection | YES | YES |
| Emergency Release | NO | YES |
| Dent Protection | NO | YES |
| Works W/Backbox | YES | YES |
| Warranty | 3 YEARS | 5 YEARS |
| Drainage | HAS | HAS |
| Bed Extensions | ALL | ALL |
| Bed Liners | DON’T EXCEED BED RAILS | DON’T EXCEED BED RAILS |
| Locking System | Single LOCK | DUAL LOCKING SYSTEM |
| Price | $969 | $1189 |
Durability Analysis
The Bakflip G2 is engineered for everyday use and moderate conditions. Its aluminum panels are sturdy enough to withstand daily wear and tear. If your truck is primarily used for commuting or light hauling, the Bakflip G2 offers sufficient durability.
On the other hand, the Bakflip F1 is designed for those who need a more rugged solution. It features fiberglass-reinforced panels that provide an extra layer of durability. If you frequently find yourself in harsh weather conditions or rough terrains, the Bakflip F1 is the better option between Bakflip f1 vs g2 in terms of durability.
Bakflip G2 Pros and Cons
The Bakflip G2 shines in its ease of installation and affordability. It’s a budget-friendly option that doesn’t skimp on essential features. However, it may lack some of the advanced features found in more expensive models. For example, while it offers basic weather resistance, it might not hold up as well in extreme conditions.
Conversely, the Bakflip F1 offers a more feature-rich experience. Its enhanced durability and additional features like advanced weather sealing make it a premium choice. However, these extra features come at a higher price point. When weighing the pros and cons of Bakflip f1 vs g2, consider what you’re willing to invest for additional features and durability.
Choose between BAKFlip G2 VS BAKFlip F1
BAKFlip G2 tonneau cover
BAKFlip F1 tonneau cover
Conclusion
In summary, both Bakflip G2 and Bakflip F1 offer compelling features and durability. Your final choice between Bakflip f1 vs g2 will hinge on your specific needs and what you prioritize more—durability or features. All Tonneaus are very good. Choose one according to your needs, budget, and truck condition.